ALTEC LANSING 345A-445A Tube Amplifier Preamplifier

( Brand: Altec Lansing ), ( Manufacturer Part Number: 345A-445A ), ( Model: 345A 445A ), ( Bundle Listing: Yes ), ( Country/region Of Manufacture: United States ), ( Type: Power Amplifier And Pre-amplifier )

Review ALTEC LANSING Restored Vintage Tube Amplifier Matching 445a Preamplifier

The Altec Lansing 345A Tube Amplifier and 445A Preamplifier are a pair of vintage audio components that exude a timeless charm and deliver an exceptional listening experience.

The Altec Lansing 345A Tube Amplifier is a testament to classic audio engineering. Housed in a sturdy, vintage-inspired cabinet, this mono amplifier features three 6L6GC power tubes and one 12AX7 tube for the input stage. Its high-quality components, including a pair of output transformers, ensure a rich, full-bodied sound with a warm, analog character. The 345A offers adjustable gain, impedance, and bias controls, allowing for fine-tuning to match a variety of speaker loads. Its heavy-duty construction is a nod to its robustness and longevity.

The Altec Lansing 445A Preamplifier complements the 345A perfectly. This preamplifier features a clean, minimalist design with a focus on functionality. Three separate inputs for phono, tape, and line sources allow for versatile connectivity. The 445A also houses a pair of 12AX7 tubes for the input stage, ensuring a natural, detailed sound. The preamplifier's high-quality components, including a custom-wound transformer, provide a wide frequency response and a low noise floor. The 445A offers a balance control, allowing for precise fine-tuning of the sound to ensure perfect balance between the left and right channels.

Together, the Altec Lansing 345A Tube Amplifier and 445A Preamplifier create a harmonious symphony of sound, transporting listeners back to the golden age of audio. Their combination of vintage aesthetics, high-quality components, and exceptional sound quality makes them a must-have for any audiophile seeking a unique and immersive listening experience.

1. Authentic vintage sound: Altec Lansing 345A tube amplifier delivers a rich, warm, and authentic vintage sound that is hard to replicate with modern amplifiers.

2. High-quality components: The amplifier uses high-quality components, such as tube output stages, that contribute to its superior sound quality.

3. Versatile: The amplifier can be used with various types of speakers, including those with 8-ohm or 4-ohm impedance.

4. Sturdy construction: The Altec Lansing 345A tube amplifier is built to last with a sturdy metal chassis and a heavy-duty power transformer.

5. Collectible value: As a vintage amplifier, the Altec Lansing 345A has collectible value, making it a good investment for audio enthusiasts.

1. High-quality sound: The Altec Lansing 445A preamplifier delivers a clear, detailed, and high-quality sound, making it an excellent companion for the Altec Lansing 345A tube amplifier.

2. Versatile: The preamplifier can be used with various types of speakers and amplifiers, making it a flexible choice for audio enthusiasts.

3. High-quality components: The preamplifier uses high-quality components, such as tube input stages, that contribute to its superior sound quality.

4. Sturdy construction: The Altec Lansing 445A preamplifier is built to last with a sturdy metal chassis and a heavy-duty power transformer.

5. Collectible value: As a vintage preamplifier, the Altec Lansing 445A has collectible value, making it a good investment for audio enthusiasts.

1. Higher price: The Altec Lansing 345A tube amplifier is more expensive than modern amplifiers, which may be a deterrent for some buyers.

2. Maintenance required: Tube amplifiers require regular maintenance, such as tube replacement, which can be costly and time-consuming.

3. Limited power output: The Altec Lansing 345A tube amplifier has a limited power output compared to modern amplifiers, which may not be sufficient for high-power speakers.

4. Limited features: The Altec Lansing 345A tube amplifier has limited features, such as no built-in equalizer or tone controls, which may be a disadvantage for some users.

1. Higher price: The Altec Lansing 445A preamplifier is more expensive than modern preamplifiers, which may be a deterrent for some buyers.

2. Maintenance required: Tube preamplifiers require regular maintenance, such as tube replacement, which can be costly and time-consuming.

3. Limited features: The Altec Lansing 445A preamplifier has limited features, such as no digital inputs or outputs, which may be a disadvantage for some users.

The Altec Lansing 345A tube amplifier and 445A preamplifier are high-quality vintage audio components that deliver a rich, warm, and authentic vintage sound. They are built to last with sturdy construction and high-quality components. However, they are more expensive than modern alternatives and require regular maintenance. If you are an audio enthusiast who values vintage sound quality and collectible value, the Altec Lansing 345A tube amplifier and 445A preamplifier are excellent choices. If you prioritize modern features and lower price, you may want to consider alternative options.

If you are an audio enthusiast who values vintage sound quality and collectible value, the Altec Lansing 345A tube amplifier and 445A preamplifier are excellent choices. Consider investing in a maintenance plan to ensure the longevity of your investment. If you prioritize modern features and lower price, consider alternative options, such as modern tube amplifiers or solid-state amplifiers.

Details:

If you are into electronics will recognize the higher end Auriga's in photos. But I think tape was clean and listened for a while it did sound wonderful. I left the switch and cable in place case someone wants to restore it back original. The pots and switches are original.

You won't find a pair this clean, particularly the outside.

I should add that the power indicator light bulb, easy to replace, is not working. I am the second owner and have had them for about 20 years. This is ready for regular enjoyment. I used the pre-amp only briefly as had one that custom made and was focused on restoration of power amp.

That is why there no cover. I'm no good with aesthetic restoration so I never really attempted it other than using dry brushes and a bit of water.

First, a brief history of this duo. The weighs 37lbs and pre-amp 7lbs. I mostly drove rogers ls3 5as and wow, what a sound.

The pre-amp will certainly need servicing and most likely some restoration to make it a daily use machine, but sure looks beautiful. Most of the selection buttons were scratchy. A bias pot was also added on the rear by Mr. I have a photocopied manual for the 345A and hand written all of component values in, etc.

I bypassed the front power switch and added one in back. They were purchased together by the first owner around this has been my main music for almost all of 20 years i've had it. 445a pre-amplifier: this pre-amp was powered up about 5 years ago and astonishingly, it worked. I didn't like how the power wires ran unnecessarily too close to pre-amp circuits.

Altec was in their prime at the time and dying to break into home WiFi market compete with power houses like Macintosh.

345a amplifier: 60w per channel or bridged mono block 120w: almost every component of this amplifier has been replaced with new, meticulously selected components. Incredibly warm and musical, but not muddy at all, plenty of detail. He serviced and inspected the said, wow, it sounds amazing.

Since the 1950s this duo has lived in NY, AZ and ca.

specifications cassettevintagee:

• brand: Altec Lansing
• mpn: 345a-445a
• model: 345a 445a
• bundle listing: Yes
• country/region of manufacture: United States
• type: Power Amplifier And Pre-amplifier

Shipping cassettevintagee:

• handling: 3 days
• type: Calculated
• cost: $0.0

Seller cassettevintagee:

• city: Brooklyn, New York
• zipcode: 11209

Returns cassettevintagee:

• policy: no returns

General cassettevintagee:

• consumer electronics > vintage electronics audio video consumer electronics > vintage cassette decks
• in stock: Yes

Offer cassettevintagee:

• min. bid: $2,995.00
• bids: 0
• best offer: false
• Started: July 5, 2018, 7:08 am
• Sold: 0
• : true
• quantity: 1

Ratings:

1. Great communication. A pleasure to do business with. 06-16-18
2. Quick response and fast payment. Perfect! THANKS!! 06-16-18
3. Fast payment. Thank you for your business! 06-16-18
4. Great communication. A pleasure to do business with. 06-21-18
5. ITEM EXACTLY AS DESCRIBED - FAST SHIPPING - HIGHLY RECOMMENDED SELLER! AAAA 07-03-18

Payments cassettevintagee:

• PayPal

Altec Lansing 345A-445A Is Similar To:

• 10-07-10-123 R 21 20ap Altec Lansing Vintage System Master Station (47.6% similar) The images are a big part of if you see something that concerns you, please feel free to. Vintage nos Altec Lansing 100 system master station, r 21 20AP. Please look at the pictures for more details. With box enclosure panel...(December 23rd, 2018)
• 1214 Altec Lansing Vintage Powered (48.6% similar) Great for church, meeting, party. For sale is a vintage Altec 1214 powered microphone mixer, 6 mic and 1 aux inputs with spring reverb. 00STO the lower 48 us contiguous states. Power output 100 watt 8 ohms. The microphone not included as vintage item, its offered as-is, please all photos for more ...(January 26th, 2018)
• 1269 Altec Lansing Model Channe Db Audio Power Amplifier Parts Only (51.4% similar) Sold as pictured for parts only. Altec Lansing model channel only pictured items are included - cables and other accessories not unless explicitly stated shown in pictures. 5 db audio power amplifier parts only this has been tested and it does not work properly as a blown out capacitor...(September 25th, 2018)
• 128-b Altec Tube Mono Amplifier Amp With Output Works Looks Great (36.6% similar) Will pack very well for shipping worldwide. They are to be replaced by the new owner anyway. Door hinges are fine. The thing is sold as but guaranteed to be described. Face plate is reasonably clean for the age. I used Mauriac to power it up 85V and worked produced nice clean music. The front meter ...(May 23rd, 2018)
• 13227 Altec Vintage Amplifiers (46.7% similar) 4 Altec 456B vintage AMPLIFIERS2 are still in their original Styrofoam boxes...(April 23rd, 2018)
• 1520a Altec Mono 6l6 Tube (31.4% similar) Amplifier should be gone over by a technician before being used and not considered plug play. This amplifier was found on a shelf with few of the amplifiers I will have for sale soon. Tubes test good and sell with the unit, 5U4 tube has a broken key. brings you this Altec 1520A 6L6 mono tube ...(June 11th, 2017)
• 1520t Altec Lansing Bridging Tube Mono Power Amp Sn For Parts (47.8% similar) No tubes are included. Since I'm shipping it I won't guarantee this 60 year old tube to be working. If you pay cash and pickup I will demonstrate it. Free shipping in Cronus...(March 25th, 2018)
• 1552a Altec Lansing V.u Meter (47.2% similar) Free shipping in Cronus. Meter is good...(October 24th, 2017)
• 1569-a Altec Lansing 1569a 6ca7 (38.9% similar) The frequency responses within 5 db of mid range value from 1 cycle per second to 100 kc. At 80 watts distortion is less than 2 any frequency from 60 to 20,000 cycles per second. Output tubes included are elector harmonic matched quads. Plug and play. The tubes are conservatively operated under ...(December 10th, 2017)
• 1590b Altec Lansing Vintage 200w (44% similar) I have 2 to sell these were Altec early solid state amps and designed for continuous duty in studios, theaters from 20-20KHZ the Altec 1590 power amplifier is applications where uninterrupted operation a requisite provides 200 watts of has frequency response 1 db 20 Hz khz at one watt output. You ...(January 4th, 2018)
• 1592a Altec Lansing 1592 Mixer (41.1% similar) ...(December 5th, 2017)